Extend machinery life, reduce operating costs and increase productivity with a Greentek G3 today! The G3 Max has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element – standard, plus room for two more. The ultimate in flexibility – for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer
Low level indicator provides low warning and shut-down alarm
Manual run initiates lube cycle on-demand (remote option also available)
Password protection safeguards settings
Pre-lube function can initiate lube cycle on start-up
Up to three pressure or cycle switch inputs to ensure proper lubrication cycles
Mix/match cycle and pressure switches for custom installations and feedback
Machine count input – ideally suited for inconsistently used equipment
Fault indication to external alarms
Optional Data Management System (DMS)
Work faster and smarter with Greentek’s exclusive
Data Management System (DMS) Find out exactly how your lubrication system is performing and how well it’s lubricated
Tracks history, provides data protection, upload or download data using a simple USB flash drive.
| Alarm Relay Inductive Maximum Operating Voltage (VDC) | 220 |
|---|---|
| Alarm Relay Inductive Maximum Switching Capacity | 25 VA;30 W |
| Alarm Relay Inductive Minimum Permissible Load | 10 ?A;10m VDC |
| Alarm Relay Inductive Rated Load (A) | 1 |
| Alarm Relay Resistive Maximum Operating Current (A) | 3 |
| Alarm Relay Resistive Maximum Operating Voltage (VDC) | 220 |
| Alarm Relay Resistive Maximum Switching Capacity | 50 VA;60 W |
| Alarm Relay Resistive Minimum Permissible Load | 10 µA;10m VDC |
| Alarm Relay Resistive Rated Load (A) | 2 |
| Application | On-Road Vehicles, Off-Road Equipment |
| Compatible Material | Grease |
| Compatible Metering Device | Series Progressive, Single Line Parallel |
| Control Options | Max |
| Fluid Outlet Size (cm) | 0.6350 |
| Fluid Outlet Size (in) | 0.25 |
| Fluid Outlet Size (mm) | 6.3500 |
| Fluid Outlet Thread Gender | Female |
| Fluid Outlet Thread Type | NPSF |
| For Use With | Injector-Based Systems, Series Progressive Systems |
| IP Rating | IP69K |
| Includes | Vent Valve, Wiper Arm |
| Input Cycle Rate (Hz) | 8 |
| Input Impedance | 1.1 |
| Input Load Current (mA @ 12 VDC) | 11 |
| Input Maximum Off Current (mA) | 1 |
| Input Maximum Residual Voltage (V) | 2 |
| Input Required Switch Type | Normally Open |
| Input Response Time (ms) | 60 |
| Input Sensor Voltage (VDC) | 12 |
| Low Level Carry Current (A) | 1.2 |
| Low Level Contact Rating (W) | 10 |
| Low Level Switch Rating (VDC) | 200 |
| Low Level Switching Current (A) | 0.5 |
| Maximum Fill Inlet Pressure (bar) | 344.7 |
| Maximum Fill Inlet Pressure (kPa) | 34470 |
| Maximum Fill Inlet Pressure (psi) | 5000 |
| Maximum NLGI Grade | #2 |
| Maximum Run Time (min) | 30 |
| Maximum Voltage (V dc) | 16 |
| Maximum Working Pressure (MPa) | 35.1 |
| Maximum Working Pressure (bar) | 351.6 |
| Maximum Working Pressure (kPa) | 35160 |
| Maximum Working Pressure (psi) | 5100 |
| Minimum Voltage (V DC) | 9 |
| Model | G3 |
| Number of Machine Count Sensor Inputs | 1 |
| Number of Pressure and Cycle Sensor Inputs | 3 |
| Number of Pump Elements | Up to 3 |
| Number of Sensor Inputs | 3, 1 |
| Overall Depth (cm) | 22.9 |
| Overall Depth (mm) | 229 |
| Overall Height (cm) | 33.7 |
| Overall Height (mm) | 337 |
| Overall Width (cm) | 20.3 |
| Overall Width (mm) | 203 |
| Power Connection Type | 5 Wire CPC |
| Power Type | Electric |
| Reservoir Size (l) | 2 |
| Series | Max |
| Type | Electric Piston Pump |
| Vent Valve Maximum Operating Current (A) | 2 |
| Vent Valve Maximum Operating Power (W) | 48 |
| Vent Valve Output Voltage (VDC) | 12 |
| Voltage (V DC) | 12 |
| Voltage (V) | 12 VDC |
| Weight (kg) | 6 |
